Zoiets als de hoorarmor en kleischoenen van Ramey en De Leeuw?
http://www.vettec.com/65/products/soleguard.html Omschrijving:
Sole-Guard
What is Sole-Guard?
Sole-Guard is a fast setting, 30 second, liquid urethane hoof protection material providing a durable, shock absorbent, support that retains its shape and flexibility indefinitely. Sole-Guard is designed for use without shoes and adheres to the sole sealing out moisture and debris, protecting both the frog and the sole. Once removed Sole-Guard will leave the sole in excellent condition.
When should I use Sole-Guard?
Sole-Guard is perfect for providing protection for horses without shoes when riding rough terrain, horses transitioning from shoes to bare feet and for late term broodmares who need that extra support.
How long does it take Sole-Guard to set?
Sole-Guard has an initial set time of 30 seconds with a final cure around 5-6 minutes.
How do I remove Sole-Guard from the foot?
You can remove Sole-Guard from the foot by using a hoof pick, or a pair of pull-offs. As the sole grows and exfoliates, the material will loosen up after several weeks.
Can Sole-Guard be filled to ground level?
Sole-Guard should be filled to ground level but not above that point. If filled above ground level, the horse is likely to "catch" the material at the toe and pull it out. Most often you will want to fill to the white line.
Does Sole-Guard give off heat as it sets?
Sole-Guard gives off little to no heat while curing. In the summer you will notice a bit of heat but nothing that can harm the sole.
Does the material change shape over time?
No, once set Sole-Guard will retain its shape until you remove it.
How long will Sole-Guard stay in the foot?
It all depends on the conditions you are in and the activity level of your horse. On horses that are used regularly, you should be getting 3 weeks on average out of an application.
Can this be used as a "spare tire" on the trail?
Most definitely. Sole-Guard can be applied to a foot that has thrown a shoe. Simply brush any dirt from the sole, make sure it is dry and apply. See the application directions for this technique.
How do you apply Sole-Guard to the sole?
Please refer to the application pages on the web site. It's fast and easy.
Do I have to use the plastic during application?
The use of the Contouring Plastic makes it very easy to see where the material is being spread and it does not stick to the Sole-Guard material. In a pinch you can use other flexible materials but they will probably adhere to the material and have to be worn off.
How long do I have to hold up the foot?
Normally only for about one minute. It will be weight bearing in about 30 seconds but we recommend giving it another 30 seconds or so before you put the foot down.
My best whisper is a thought
Warboel
